Play complex BC01.083.S
The children's playground complex is a modular collapsible construction that provides comfortable conditions for children to play outdoors and consists of a net with a ladder, a dunk net and a rotating structure.
The supporting elements of the structure are metal profile posts with a cross-section of at least 80x80 mm. The posts are finished with a plastic plug at the top and concreted into the ground at the bottom. To increase rigidity, the posts are equipped with additional metal supports of square cross-section 60x60 mm.
The net is made of reinforced rope cable with a diameter of at least 16 mm and securely fastened with special aluminium alloy clamps and fasteners to hold the net structure under load.
The seat of the rotating element is made of three-layer HDPE plastic with a thickness of at least 15 mm.
The frame of the rotating structure is made of a metal pipe with a diameter of at least 27 mm.
The rungs of the ladder are made of plastic with a diameter of at least 20 mm.
The supporting elements of the structure are metal profile posts with a cross-section of at least 80x80 mm. The posts are finished with a plastic plug at the top and concreted into the ground at the bottom. To increase rigidity, the posts are equipped with additional metal supports of square cross-section 60x60 mm.
The net is made of reinforced rope cable with a diameter of at least 16 mm and securely fastened with special aluminium alloy clamps and fasteners to hold the net structure under load.
The seat of the rotating element is made of three-layer HDPE plastic with a thickness of at least 15 mm.
The frame of the rotating structure is made of a metal pipe with a diameter of at least 27 mm.
The rungs of the ladder are made of plastic with a diameter of at least 20 mm.
Length x Width x Height, mm
7370x2440x2270
Drop height, mm
1800
Age group, years
4-14
All fasteners, brackets, turnbuckles, eyebolts and chains are made of stainless steel.
The corners and edges of any user-accessible part of the equipment are rounded to a radius of at least 3 mm.
Plastic plugs are installed on the ends of the supporting posts, on the places of the necessary threaded connections and on the ends of pipes (profiles) accessible to the user.
Metal elements are powder coated, except for stainless steel elements.
The welds are smooth and eliminate the possibility of injury to users on contact.
Wood materials are free of surface imperfections.
Spaces and joints between equipment elements prevent users' body parts and clothing from getting stuck.
The design allows for adult access in circumstances requiring unaided assistance to the user.
In order to improve product quality and safety, changes (image, dimensions, etc.) may be made to the product documentation.
Materials:
Metal profile pipes are made of carbon and alloy steels. Alloying additives increase the strength and corrosion resistance of steel and reduce the risk of brittle fracture. The rounding radius of square and rectangular shapes of rolled pipes should not exceed twice the wall thickness.
Laminated plywood is made of birch flaked veneer, which is the thinnest sheets of wood. The veneer sheets are impregnated with formaldehyde resin glue and then glued together in special chambers where the material is pressed under the influence of high temperatures and pressure. The resins penetrate into the structure of the wood and the result is a strong, water-resistant, temperature-resistant plywood sheet.
Low Pressure Polyethylene (HDPE) is made of multilayer, non-toxic, deep-coloured polyethylene and is a plastic sheet of various thicknesses and colour combinations. It is characterised by high strength characteristics and chemical resistance. It is resistant to water, does not react with alkalis of any concentration, with solutions of neutral, acidic and basic salts, organic and inorganic acids. Ecological, difficult to ignite material.
The corners and edges of any user-accessible part of the equipment are rounded to a radius of at least 3 mm.
Plastic plugs are installed on the ends of the supporting posts, on the places of the necessary threaded connections and on the ends of pipes (profiles) accessible to the user.
Metal elements are powder coated, except for stainless steel elements.
The welds are smooth and eliminate the possibility of injury to users on contact.
Wood materials are free of surface imperfections.
Spaces and joints between equipment elements prevent users' body parts and clothing from getting stuck.
The design allows for adult access in circumstances requiring unaided assistance to the user.
In order to improve product quality and safety, changes (image, dimensions, etc.) may be made to the product documentation.
Materials:
Metal profile pipes are made of carbon and alloy steels. Alloying additives increase the strength and corrosion resistance of steel and reduce the risk of brittle fracture. The rounding radius of square and rectangular shapes of rolled pipes should not exceed twice the wall thickness.
Laminated plywood is made of birch flaked veneer, which is the thinnest sheets of wood. The veneer sheets are impregnated with formaldehyde resin glue and then glued together in special chambers where the material is pressed under the influence of high temperatures and pressure. The resins penetrate into the structure of the wood and the result is a strong, water-resistant, temperature-resistant plywood sheet.
Low Pressure Polyethylene (HDPE) is made of multilayer, non-toxic, deep-coloured polyethylene and is a plastic sheet of various thicknesses and colour combinations. It is characterised by high strength characteristics and chemical resistance. It is resistant to water, does not react with alkalis of any concentration, with solutions of neutral, acidic and basic salts, organic and inorganic acids. Ecological, difficult to ignite material.
Other products from the series Play complexes