Play complex BC01.000.S
The children's playground complex is a modular prefabricated and demountable structure that provides comfortable conditions for children to play outdoors, and consists of a tower with a roof, the height of the platform is at least 900 mm, a climbing wall with holes and hooks for hands and feet, a crossbar with a cable, a slide with a crossbar, a fence, a vertical pole.
Bearing poles of the complex are made of metal profile pipe with a cross section of at least 80x80 mm. The top of the open post is finished with a plastic plug.
The tower floor frame is made of metal profile pipe with a cross-section of at least 20x20 mm and bent metal sheet with a thickness of at least 3 mm.
The floor of the tower is made of wear-resistant non-slip plywood at least 15 mm thick.
The roof of the tower consists of 2 slopes with wavy edges made of three-layer HDPE plastic at least 15 mm thick.
The tower fence is made of three-layer HDPE plastic at least 15 mm thick.
The slide consists of a slope, boards, a safety section and a safety bar. The slide has a starting section with a height of at least 900 mm, a sliding section and an ending section.
The slope is made of a single sheet of stainless steel at least 1.5 mm thick.
The sides of the slide are made of three-layer HDPE plastic with a thickness of at least 15 mm and a height of at least 100 mm.
The protective section of the slide is made of three-layer HDPE plastic at least 15 mm thick.
The safety bar is made of stainless metal pipe with a diameter of at least 27 mm, encouraging the child to sit down and is installed at a height of at least 600 mm from the surface level of the starting section of the slide.
The vertical pole is made of stainless metal pipe with a diameter of at least 27 mm.
Translated with DeepL.com (free version)
The inclined wall of the climbing wall must be made of wear-resistant non-slip plywood at least 15 mm thick. Hooks for hands and feet shall be made of composite material. A stainless metal bar with a diameter of at least 27 mm with a reinforced rope cable with a diameter of at least 16 mm shall be fixed above the wall.
Bearing poles of the complex are made of metal profile pipe with a cross section of at least 80x80 mm. The top of the open post is finished with a plastic plug.
The tower floor frame is made of metal profile pipe with a cross-section of at least 20x20 mm and bent metal sheet with a thickness of at least 3 mm.
The floor of the tower is made of wear-resistant non-slip plywood at least 15 mm thick.
The roof of the tower consists of 2 slopes with wavy edges made of three-layer HDPE plastic at least 15 mm thick.
The tower fence is made of three-layer HDPE plastic at least 15 mm thick.
The slide consists of a slope, boards, a safety section and a safety bar. The slide has a starting section with a height of at least 900 mm, a sliding section and an ending section.
The slope is made of a single sheet of stainless steel at least 1.5 mm thick.
The sides of the slide are made of three-layer HDPE plastic with a thickness of at least 15 mm and a height of at least 100 mm.
The protective section of the slide is made of three-layer HDPE plastic at least 15 mm thick.
The safety bar is made of stainless metal pipe with a diameter of at least 27 mm, encouraging the child to sit down and is installed at a height of at least 600 mm from the surface level of the starting section of the slide.
The vertical pole is made of stainless metal pipe with a diameter of at least 27 mm.
Translated with DeepL.com (free version)
The inclined wall of the climbing wall must be made of wear-resistant non-slip plywood at least 15 mm thick. Hooks for hands and feet shall be made of composite material. A stainless metal bar with a diameter of at least 27 mm with a reinforced rope cable with a diameter of at least 16 mm shall be fixed above the wall.
Area, m2
21,2
Length x Width x Height, mm
1540х2710х2990
Drop height, m
0,9
All fasteners, brackets, turnbuckles, eyebolts and chains are made of stainless steel.
The corners and edges of any user-accessible part of the equipment are rounded with a radius of at least 3 mm.
Plastic plugs are installed on the ends of supporting posts, on the places of necessary threaded connections and on the ends of pipes (profiles) accessible to the user.
Metal elements are powder coated, except for stainless steel elements.
Welded seams must be smooth and exclude the possibility of injury to users on contact.
Wood materials are free of surface defects.
Spaces and joints between the elements of the equipment must not allow users' body parts and clothes to get stuck.
The design provides for the possibility of access by an adult in circumstances requiring unauthorised assistance to the user.
In order to improve the quality and safety of the product, changes may be made to the product documentation (image, dimensions, etc.).
Materials:
Metal profile pipes are manufactured from carbon and alloy steels. Alloying additives increase the strength, corrosion resistance of steel, reduce the risk of brittle fracture. The rounding radius of square and rectangular shapes of rolled pipes should not exceed twice the wall thickness.
Laminated plywood is made of birch husked veneer, which is the thinnest sheets of wood. The veneer sheets are impregnated with formaldehyde resin glue and then glued in special chambers where the material is pressed under the influence of high temperatures and pressure. The resins penetrate the structure of the wood and the result is a strong, water-resistant, temperature-resistant plywood sheet.
Low pressure polyethylene (HDPE) is made of multilayer non-toxic polyethylene with a deep colour layer and is a plastic sheet of various thicknesses and colour combinations. It is characterised by high strength characteristics and chemical resistance. It is resistant to water, does not react with alkalis of any concentration, with solutions of neutral, acidic and basic salts, organic and inorganic acids. Ecological, difficult to ignite material.
The corners and edges of any user-accessible part of the equipment are rounded with a radius of at least 3 mm.
Plastic plugs are installed on the ends of supporting posts, on the places of necessary threaded connections and on the ends of pipes (profiles) accessible to the user.
Metal elements are powder coated, except for stainless steel elements.
Welded seams must be smooth and exclude the possibility of injury to users on contact.
Wood materials are free of surface defects.
Spaces and joints between the elements of the equipment must not allow users' body parts and clothes to get stuck.
The design provides for the possibility of access by an adult in circumstances requiring unauthorised assistance to the user.
In order to improve the quality and safety of the product, changes may be made to the product documentation (image, dimensions, etc.).
Materials:
Metal profile pipes are manufactured from carbon and alloy steels. Alloying additives increase the strength, corrosion resistance of steel, reduce the risk of brittle fracture. The rounding radius of square and rectangular shapes of rolled pipes should not exceed twice the wall thickness.
Laminated plywood is made of birch husked veneer, which is the thinnest sheets of wood. The veneer sheets are impregnated with formaldehyde resin glue and then glued in special chambers where the material is pressed under the influence of high temperatures and pressure. The resins penetrate the structure of the wood and the result is a strong, water-resistant, temperature-resistant plywood sheet.
Low pressure polyethylene (HDPE) is made of multilayer non-toxic polyethylene with a deep colour layer and is a plastic sheet of various thicknesses and colour combinations. It is characterised by high strength characteristics and chemical resistance. It is resistant to water, does not react with alkalis of any concentration, with solutions of neutral, acidic and basic salts, organic and inorganic acids. Ecological, difficult to ignite material.
Other products from the series Play complexes